Telephone Service Installation
Southern DataStream, Inc.
bottom of page

Click on thumbnail to view larger picture and obtain more detailed explanation.

Previous page 2 of 3 Next
100_0112 100_0114 100_0116 100_0118 100_0120
Cable protection Top on Raking Seeded Pushed into ground
100_0122 100_0126 100_0128 100_0131 100_0132
Final Splicer Blueprints Tools Top off
100_0134 100_0136 100_0138 100_0140 100_0142
Cut covering Short blade Slit Remove plastic Both cables
100_0144 100_0146 100_0148 100_0150 100_0152
Plastic removed Another slit Screwdriver Insulator Electrical tape
100_0154 100_0156 100_0158 100_0160 100_0162
Metal plate White strip Individual wires Plastic hangers Hanging wires
100_0164 100_0166 100_0168 100_0170 100_0172
Piers Removing strips Pier ID replaced Wire ties Gathered together
100_0174 100_0176 100_0178 100_0180 100_0182
Piers bundled Splicing machine Base Assembled splicing guide Conductor
100_0184 100_0185 100_0186 100_0188 100_0190
Conduction 1st layer Lining up wires One cable's pier 2nd conductor
100_0192 100_0193 100_0194 100_0196 100_0200
2nd cable's same pier Top view Ready for splicing Close-up Splicing tool
100_0202 100_0204 100_0206 100_0224 100_0226
Splicing tool set-up Close-up Pumping splicing tool Cut plastic coating Wires cut and bonded

top of page
This webpage created by SDS intern Joni DuFresne
last updated  03/10/2004